johnswinyer

Hi,
Just bought after market power fold mirrors to upgrade the non power fold mirrors that i have on my 2014 XLT EB.
Was wondering if anybody knows what the pin out schematic is on the mirrors them self's?

Thank you
John
2014 f-150 XLT crew EB

timtrace

Just did this not even 36 hours ago on my 2014 XLT EB. Post 131 of this topic has what you're looking for.

timtrace

Warning: it is not even close to a plug-and-play installation. Wires must be pulled between the front doors, you have to have the correct switch (if you want the OEM appearance) and the factory door wiring harness must be lightly modified. Fortunately all of this is very well documented in the above linked topic.

johnswinyer

Did you connect pin #7 from the mirror plugs to pin #6 on the switch with the grey wire that is already there, which i think is the common.

(I could pigtail into that pin 6 gray wire and connect the other two mirror plug #7 pins, but I'm unsure of what is already going on in that circuit)

timtrace

Yes. Just tag your mirror lines onto the existing wire. Same topic linked above, post 132.

johnswinyer

Thank you very much for the information.