Help! Need help with Magnaflow 16616 exhaust
11-06-2009, 04:43 PM
#1
Member
Thread Starter
Join Date: Jun 2009
Location: Hastings, MN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Help! Need help with Magnaflow 16616 exhaust
I ordered a 16617 for a regular cab when I really needed a 16616 for an extended cab. Found out when I layed it all out under my Truck.
I called Magnaflow tech support and was told that the only difference between the two kits is the hanger that is welded to the kit.
16617: hanger welded to the two tailpipes
16616: hanger welded to the back of the muffler and points forward
Can anyone post a picture of the 16616 hanger so I can fabricate it myself, I can't find it on the internet anywhere. Provide some deminsions of the hanger if you will too.
I called Magnaflow tech support and was told that the only difference between the two kits is the hanger that is welded to the kit.
16617: hanger welded to the two tailpipes
16616: hanger welded to the back of the muffler and points forward
Can anyone post a picture of the 16616 hanger so I can fabricate it myself, I can't find it on the internet anywhere. Provide some deminsions of the hanger if you will too.
11-06-2009, 08:03 PM
#2
Exhaust
I have the Magnaflow 16617 installed on my truck. 08 Reg Cab. When I talked to thier Tech person I was told the only differance between the 16616 & 16617 was the inlet pipe that comes with the kit. Because they had sent me the inlet pipe by mistake since it is for the Ext. Cab. And the hangers were in the same postion. Hopefully I have'nt confused you.