Installation Instructions for...
#1
**************
Thread Starter
Join Date: Nov 2008
Location: AZ
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Installation Instructions for...
the AFE Stage 2 CAI?
Is it pretty straight forward? perhaps there are some instructions somewhere?
Any help/comments are appreciated.
Is it pretty straight forward? perhaps there are some instructions somewhere?
Any help/comments are appreciated.
#2
Notorious Thread Editor
It was very easy. I am no master mechanic and it took 45mins. Mind you there was a relay in the way i mine cause of the size of the air box and ford moved it on my model, but other than that. Cake...
You don't have the destructions that came with the AFE? They were vague, but doable.
You don't have the destructions that came with the AFE? They were vague, but doable.
#4
Notorious Thread Editor
#5
**************
Thread Starter
Join Date: Nov 2008
Location: AZ
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#6
**************
Thread Starter
Join Date: Nov 2008
Location: AZ
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
For the MAF sensor, how do you remove it from the airbox? It seems to be screwed down?
I have the 4.6L V8
I have the 4.6L V8
Last edited by borborygmi; 11-21-2008 at 08:06 PM.
#7
Notorious Thread Editor
What year? There seem to be two different ones for the 4.6.
There is this one.
http://www.afeproducts.com/is/54-11122.pdf ir says is for the 06-07.
And then antother one for the 07.5
The link doesn't work though. Try googling the model
54-11402
Ford F-150 07.5 V8-4.6L
Stage 2 Cold Air Intake System Type Cx
if this is the one you have.
The MAF is held in by two hex head screws. At least on the 5.4 it is but I do not think it is any different by looking at where it goes your CAI.
There is this one.
http://www.afeproducts.com/is/54-11122.pdf ir says is for the 06-07.
And then antother one for the 07.5
The link doesn't work though. Try googling the model
54-11402
Ford F-150 07.5 V8-4.6L
Stage 2 Cold Air Intake System Type Cx
if this is the one you have.
The MAF is held in by two hex head screws. At least on the 5.4 it is but I do not think it is any different by looking at where it goes your CAI.
Trending Topics
#8
**************
Thread Starter
Join Date: Nov 2008
Location: AZ
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
To clarify it's a 2006 4.6L V8 and that link above was the instructions they sent in the box.
Thanks for the help.