Pics of 2.5" leveling blocks on front only!
10-26-2015, 05:01 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Pics of 2.5" leveling blocks on front only!
Excuse the title meant to say "spacers" not blocks and do not know how to change it....
Just ordered Superlift 2.5" leveling spacers for the front for my wife's 2013 f150.....
Leaving the rear alone I like the front end little higher then rear.
Want to see some pics of other trucks with same setup or similar to it. Thanks!
This is my wife's truck and here's a pic of it now stock & no level.
Just ordered Superlift 2.5" leveling spacers for the front for my wife's 2013 f150.....
Leaving the rear alone I like the front end little higher then rear.
Want to see some pics of other trucks with same setup or similar to it. Thanks!
This is my wife's truck and here's a pic of it now stock & no level.
Last edited by Trevorb69; 10-26-2015 at 05:40 PM. Reason: Added pic quote
10-30-2015, 10:21 PM
#3
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
10-31-2015, 02:01 AM
#4
Iraq Lobster!
Here's mine. It looks higher in the front due to the angle of the photo, but I've measured and the fender arcs are w/in 1/4", front to back. Tires are Terra Grapplers, 305/50/20 and the ride quality really hasn't changed that I can tell. The only issue is it's harder to tell where the nose is than before, so I leave my *** end hanging out in parking lots a lot. Oh, I can't remember the bull bar's maker, but I think it start's with an A and it was about $150...if anyone's curious.
Edit....found another pic
Edit....found another pic
10-31-2015, 06:14 PM
#5
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Here's mine. It looks higher in the front due to the angle of the photo, but I've measured and the fender arcs are w/in 1/4", front to back. Tires are Terra Grapplers, 305/50/20 and the ride quality really hasn't changed that I can tell. The only issue is it's harder to tell where the nose is than before, so I leave my *** end hanging out in parking lots a lot. Oh, I can't remember the bull bar's maker, but I think it start's with an A and it was about $150...if anyone's curious.
Edit....found another pic
Edit....found another pic
Don't send pics man. Anyway else u can upload them? Thanks!
Trending Topics
11-01-2015, 01:52 AM
#8
Iraq Lobster!
Not sure what you mean by "don't send pics" but they're linked from Photobucket and show up on my computer. I'll try it the 'old school' way and typ the 'img' tags manually instead of using the img tags photobucket provides. Worst case, look up cody6766 on photobucket and look in the random folder.
11-01-2015, 01:51 PM
#9
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Not sure what you mean by "don't send pics" but they're linked from Photobucket and show up on my computer. I'll try it the 'old school' way and typ the 'img' tags manually instead of using the img tags photobucket provides. Worst case, look up cody6766 on photobucket and look in the random folder.
Sorry meant to say "don't see pics". I was looking at it on my computer and they wouldn't come up but when I looked on my phone they did. Nice truck man! Thanks for the info!
