2013 suspension upgrade
02-23-2015, 01:50 PM
#1
Member
Thread Starter
Join Date: Feb 2015
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
2013 suspension upgrade
Got a 2013 f-150 has a 2.5 inch level and 1 inch block in the back. Edge tuned boss 302 intake manifold k&n intake system cat back exhaust with resonator delete kit. 35 in BF Goodrich all terrains. But anyways my dad has a raptor and we've been rippin it through the sand dunes the past week. And I was wondering what I could do to upgrade the suspension or what products that are out to build up my truck to run some type of set up like that. Any input would be awesome!
02-23-2015, 01:59 PM
#2
Uniball upper control arms
Remove the stock coil and spacers and drop in some aftermarket coilovers.
That'd be a good start at least, then replace stuff as you break it.
[MENTION=156426]F150Lifts.com[/MENTION] could hook you up.
http://www.f150lifts.com/2009-2014_c_137.html
Remove the stock coil and spacers and drop in some aftermarket coilovers.
That'd be a good start at least, then replace stuff as you break it.
[MENTION=156426]F150Lifts.com[/MENTION] could hook you up.
http://www.f150lifts.com/2009-2014_c_137.html
02-23-2015, 02:27 PM
#3
Senior Member
Dependent only on how much you have to spend. All the Raptor suspension will bolt on in place of your stock gear.
Read:
https://www.f150forum.com/f34/mid-tr...thread-224051/
Read:
https://www.f150forum.com/f34/mid-tr...thread-224051/
