Still have slight vibration after installing CBR
#1
Member
Thread Starter
Still have slight vibration after installing CBR
Greetings, maybe somebody can point me in the right direction on this, i lowered my 2005 Lariat with a 2/5 DJM kit and ended-up with a bad vibration on take off (from standing still); i bought and had installed a McGaugy's Carrier Bearing Relocator. It got better but there's still a slight vibration.
Mechanic said it could be a number of other things and i wonder what would be the most likely culprit?
I have an EDGE programmer set on 1, the 2 piece drive shaft is a new (rebuilt) one, wheels and tires are stock.
Appreciate any help.
Mechanic said it could be a number of other things and i wonder what would be the most likely culprit?
I have an EDGE programmer set on 1, the 2 piece drive shaft is a new (rebuilt) one, wheels and tires are stock.
Appreciate any help.
Last edited by treetop; 11-09-2010 at 06:35 PM.
#5
Member
Thread Starter
Thanks for the replies. Sure did get an alignment and (road-force) balance; she track straight and smooth on the highway.
I feel the vibration in the steering wheel.
I'll take it back to the shop and have them play with the pinion angle and see if that fixes it.
I feel the vibration in the steering wheel.
I'll take it back to the shop and have them play with the pinion angle and see if that fixes it.