tnerenberg18

I've decided it's time for me to build my 07 STX 2wd in a different direction... DOWN! My ultimate goal is to lay frame. I've done some research and have decided that for the rear end ill be using Ride Tech's bolt on 4link kit. For bags ill probably be using slam specialties RE7's. BUT AS FAR AS EVEYTHING ELSE I have no clue what to do. What spindles and control arms should I use for the front? What air system should I run? Accuair? I have no clue.

Someone help me out and put me in the right direction. Anyone on here have an 04-08 laying frame?

Thanks.

Rubicon35

djm arms and belltech spindles will get you low in the front. 6 inches or so but not laying frame

nyterydrtuckn26ss

find a shop to do it most newer fords require custom parts you can contact these guys one of best in the business http://www.ekstensive.com/

shaynecsmith

Look at Michigan metal works online store they have a weld on 4 link for around 300 and control arms that use factory mounting with a beltech drop spindle that can lay 24s

maxpat82

MMW control arms
(stock mounting point with belltech drop spindle or raised upper mounting point with stock spindle)

4link with panhard bar or watts link.

forget about ridetech 4link bolt-on...you won't lay frame with that.