SlamAir helper bags for 2015+?
#1
Senior Member
Thread Starter
SlamAir helper bags for 2015+?
I have been reading through some of the threads and have seen a couple of the custom helper bag setups on the 2015+ trucks. But I'd rather not have to have anything custom built.
I am going to be installing the Belltech 3/5.5 kit soon and want to install helper bags for when I tow a trailer of load the bed up with my dirt bikes.
I don't see a Slamair setup listed on AirLift's site for the 2015+, so has anyone tried the 2009-2014 kit on their 2015+?
Thanks in advance.
Chris
I am going to be installing the Belltech 3/5.5 kit soon and want to install helper bags for when I tow a trailer of load the bed up with my dirt bikes.
I don't see a Slamair setup listed on AirLift's site for the 2015+, so has anyone tried the 2009-2014 kit on their 2015+?
Thanks in advance.
Chris
#2
Senior Member
Thread Starter
I spoke to AirLift today and their response was "We do not have a fitment for that at this time.. Not sure if we will look into it in the future or not."
So, I guess my only option is to do a full custom setup or try to modify the 2009-2014 SlamAir setup to work on the 2015.
Any ideas?
So, I guess my only option is to do a full custom setup or try to modify the 2009-2014 SlamAir setup to work on the 2015.
Any ideas?
#3
#4
Senior Member
Thread Starter
Well, I took the gamble and ordered the 2009-2014 F-150 Airlift SlamAir setup and it bolted up and works PERFECTLY on my 2015 F-150 with a Belltech 3/5.5" drop.
I will get some pictures soon, but I wanted to let everyone know that the kit works great and stopped ALL of my bottoming out issues with or without a load in the bed.
Chris
I will get some pictures soon, but I wanted to let everyone know that the kit works great and stopped ALL of my bottoming out issues with or without a load in the bed.
Chris
The following users liked this post:
PLASMAN (12-21-2019)
#5
Senior Member
Thread Starter
Here are a few pics of the SlamAir setup on my truck. I'll get better pics next time I have the wheels off.
If you look at the picture above, you can see that the upper mount on the passenger side is exactly where the rear most exhaust hanger used to be. Due to this I had the tailpipe cut off and a turn down installed as shown below.
If you look at the picture above, you can see that the upper mount on the passenger side is exactly where the rear most exhaust hanger used to be. Due to this I had the tailpipe cut off and a turn down installed as shown below.
#6
Looks like a great set-up !!! Nice job