It says LOWERED TRUCKS, so here goes
#1
It says LOWERED TRUCKS, so here goes
I figured I would actually get a headstart on the INTERIOR by LOWERING and relocating the drivers seat.
I dropped it down almost 2 inches by removing the stock brackets and installing 2 inch box steel. Then drilled new mounting holes almost 5 inches rearward of the stock location. I was still able to get the seatbelts to fit the stock mounting holes, and have a LOT more room in the seatbelt and floorboard.
It took me about 3 hours to do just simply because I am old, fat and lazy and did not want to get in too big a hurry.
I am working on uploading a video of the end result on youtube right now, but it will take it a little while to get it completed. Once it is done, I will add the video to this posting.
The truck is a 1997 F150 with the 4.2L V6 Ex-cab
I dropped it down almost 2 inches by removing the stock brackets and installing 2 inch box steel. Then drilled new mounting holes almost 5 inches rearward of the stock location. I was still able to get the seatbelts to fit the stock mounting holes, and have a LOT more room in the seatbelt and floorboard.
It took me about 3 hours to do just simply because I am old, fat and lazy and did not want to get in too big a hurry.
I am working on uploading a video of the end result on youtube right now, but it will take it a little while to get it completed. Once it is done, I will add the video to this posting.
The truck is a 1997 F150 with the 4.2L V6 Ex-cab
#3
ONE BETTER!! VIDEO!!!!!!!!!!!
Yes, it has a bit of BLAH BLAH, but again.. I am NOT Steven Spielberg!!
Also, this is recorded in 1080p HD on my Droid Razr MAXX HD, so if its a bit grainy, just change to a higher setting and it will get CLEAR!!
Last edited by Big_Ed; 02-23-2013 at 10:16 PM.