runr4lif65

Just installed a DJM 2/4 kit with CALMAX shocks (rear). Took it out for the first ride yesterday and immediately noticed how rough the ride is. Feeling a lot of vibration and wheel play in the steering wheel under very normal driving conditions. I'm thinking wheel alignment and/or balancing. Any ideas or thoughts are welcomed.

Here are a few stats to consider:

'09 KR/SC...6.5 bed
DJM 2/4 Kit with CALMAX shocks
22" wheels
Yokohama Parada 305/45/22

NORCAL SS

have you aligned it yet if not front will be way off.

in rear did you take the bumpstops off?

runr4lif65

Yes, they did the alignment...looking at having a second shop verify the alignment. Quite difficult to find a local shop here in Germany capable of aligning a full size truck with 22's.

Not sure if they removed the bumpstops or not. Educate me...where would I look? Oh, one last thing...the "before" pics I sent to you, you mentioned I may have a block in the back. Educate me on this one as well...where would I look?

NORCAL SS

If you did the 4 inch rear kit block would be gone so doesnt matter.

please look at picture #40 you should have that on the frame
http://djmsuspension.com/Articles%20...ax%20Drop.html