My 2011 5.0 ccsb FX2 with Belltech 3.5/5.5 drop kit installed
#1
Member
Thread Starter
My 2011 5.0 ccsb FX2 with Belltech 3.5/5.5 drop kit installed
here's a few quick cell phone pics with the drop installed, waiting for my solenoids to be delivered to put on the rest of the slam air kit. it sits 4'' lower to the ground in the front(used no shims or spacers on the strut) and 5.5'' lower in the rear rite now. back is 1/2'' higher than the front.
front fenders are 32-7/8'' from the ground and the rear fenders are 33-1/4 off the ground. just for a reference easy to measure. tires are 305/40/22
thanks to CUZVINNY, and DJM/BELLTECH DIRECT for some helpful install advice on the way
and the Suspension source for the package deal on everything!
front fenders are 32-7/8'' from the ground and the rear fenders are 33-1/4 off the ground. just for a reference easy to measure. tires are 305/40/22
thanks to CUZVINNY, and DJM/BELLTECH DIRECT for some helpful install advice on the way
and the Suspension source for the package deal on everything!
Last edited by tjs50fx2; 12-02-2012 at 09:57 AM.
#7
Member
Thread Starter
thanks fellas! i'm waiting for my solenoids to come in to hook up the rest of the bags. going to run them off of my air system in the truck with a gauge and switch installed in the center console to make adjustments easy when i need them. I'm going to correct the driveline angles today since i have a small vibration at 50-60mph. other than that it rides great and corners much better than before!