Lower your truck; I'm paying!!
#12
Senior Member
hauling motorcycle in the bed or towing motorcycle in an enclose trailer(let say 6x12)?
Nobman: Always wanted a truck that low since I lowered my 1987 Ranger 3/4...but sold it.
Jetpilot2: I have the exact same truck( not the same color..mine is gray, not silver) and I'm planning on dropping it 3/5 with the DJM kit in the spring.
Last edited by maxpat82; 11-18-2010 at 11:02 AM.
#13
yea mostly motorcycles and smaller trailers, but i also tow a 4300 lb wakeboarding boat as well haha. thats where the blower and all the drivetrain work comes in handy
#14
I was beginning to think no one visited this forum! That truck is sick and I would do the exact same thing if I was showing it...
I have a trailer, but won't for long, so towing is no longer necessary. I will be using the truck as a daily driver with occasional small loads in the bed.
I talked to Tony and he gave me some great advice. It looks like I will be going with DJM parts; 2/5 with shocks. That should be just about right with my Saleens. I should be getting the wheels and tires installed within the next two weeks, and then the kit installed the first or second week of Dec. The only bad part is; I won't be home to enjoy it until after the new year! :-(
I have a trailer, but won't for long, so towing is no longer necessary. I will be using the truck as a daily driver with occasional small loads in the bed.
I talked to Tony and he gave me some great advice. It looks like I will be going with DJM parts; 2/5 with shocks. That should be just about right with my Saleens. I should be getting the wheels and tires installed within the next two weeks, and then the kit installed the first or second week of Dec. The only bad part is; I won't be home to enjoy it until after the new year! :-(
#15
Senior Member
ok thanks. that's over my 6x12 when loaded(~3000lbs). but I tow on long haul(4 to 800km) not to sure about c-notch. (don't remember having find one for a 04-08)
Saleen are 23s
Saleen are 23s
#17
#18
BAMF Club
Oh man, that thing is going to be awesome! I think you should peel off the decals soon, or get a custom set blacked out
#19
BAMF CLUB MEMBER
Join Date: Oct 2010
Location: Derby, Kansas
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
#20
Senior Member
Join Date: Aug 2010
Location: edmonton alberta
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I would say for your truck, if your going to go low, go real low. don't waste your time dropping it 1 or 2". If you only do a slight drop, in time it won't be low enough. get it done right the first time. if they make drop spindles for your year I would go with that and a flip kit.