Im talkin slammed
#11
Member
Join Date: Dec 2008
Location: Grande Prairie Alberta.
Posts: 98
Likes: 0
Received 2 Likes
on
2 Posts
You could probably mix and match different lowering kits to get a decent size drop. But you will have to notch the frame and if you go to low probably have to tub it too. I know of guys on gmfullsize.com that have the 07+ trucks that are going as low as 8/11 by mixing different kits together.
#12
F150 SUSPENSION GURU
Ive done many trucks with the slammed look over the years.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
#13
F150 SUSPENSION GURU
Ive done many trucks with the slammed look over the years.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
#14
Member
Join Date: Dec 2008
Location: Grande Prairie Alberta.
Posts: 98
Likes: 0
Received 2 Likes
on
2 Posts
Ive done many trucks with the slammed look over the years.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
the rear flip kit along with 2 inch shackles will give you 8 inches
front you can do belltech 2 inch spindles along with 3 inch drop springs with the front end alignment cam kit and your set to go.
Anything else just shoot.
#15
F150 SUSPENSION GURU
http://www.spcalignment.com/PROD_DIR...md2=86240&cmd3=
should do the trick and they are like 80 bucks.