Originally Posted by coryjones
I did a Belltech 3" strut up front and with close to a 1,000# of work stuff in the back the rear dropped 3 or 4". As you can see it is not enough i was thinking i would do a 2" hanger in the rear and a 2" set of springs in the front. The only kit i can find is the ground force kit http://www.summitracing.com/parts/grf-9987/applications
and it seems way over priced for 2 coils two hangers and some shims. I looked for about a hour yesterday and cant find what i want. Has anyone came across a set of 2" drop springs? I can buy drop hangers locally for $50 then i would just need shims for the axle.
Are you 4x4? (If so take out the Block for 1").
Im not sure why your talking about hangers when you can grab a pair of 2" Belltech Shackles from Tony here (Djm/Belltech Direct) for the rear. There quick and cheap to put on. Hangers are welded or riveted. If you want the front lower grab Belltech coils & dial in with the spacers on your Drop struts (they get you 3.5" drop alone no spacers up to +1) ...the coils will grab you the other 2"👌🏼.
Your talking somewhere around $250-$300 total i'd say.
If you want to go lower than that in the rear you have to go with a flip kit.. Thats another Ball game for you carrying that weight.
If your 3" in the front then your 4 1/2" in the rear now. Im 3.5/5.5 and Level & so is my cousins Supercrew.