dropped truck wheel
#1
Senior Member
Thread Starter
dropped truck wheel
im in process of bagging my truck and im about to buy 24 inch wheels what offset would i need to get for it to tuck without any issues? ive never been able to figure out these offsets
#5
#8
Senior Member
the 04+ bodystyle have really high offset.
the stock wheel is +44!!! I would stick with those high number.
ps.: you'll need to tub the box and front for 24" to fit
you're missing the cross member on the bridge..planning to put one?
your top bag mount should have been the other way: you'll loose 1-2" when you'll put your lower bag mount (need at least 3" at full drop to fit the bags.)
all that depend on how tall tire you plan to run.
the stock wheel is +44!!! I would stick with those high number.
ps.: you'll need to tub the box and front for 24" to fit
you're missing the cross member on the bridge..planning to put one?
your top bag mount should have been the other way: you'll loose 1-2" when you'll put your lower bag mount (need at least 3" at full drop to fit the bags.)
all that depend on how tall tire you plan to run.
Last edited by maxpat82; 03-10-2016 at 08:00 AM.
The following users liked this post:
XDf150 (03-11-2016)
#10
Do you plan to body drop it later down the road? I would assume yes, as it's the natural process of a bag setup, or atleast it is for me but I have a serious dropped problem. If you are you might want to just save time and money and body drop the bed now instead of building a notch cover and tubbing the rear for big wheels. Just a thought.