DJM Control arms and 3 inch springs
#1
Drivin' my Fiso
Thread Starter
Join Date: Apr 2012
Location: Kansas City
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
DJM Control arms and 3 inch springs
Id like to put my truck down 5 inches in the front, but my only concern would be if a good alignment guy could still get this to be straight. Would this be to low to keep it from wearing the inside of the tires off?
#3
Drivin' my Fiso
Thread Starter
Join Date: Apr 2012
Location: Kansas City
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#6
Senior Member
there was a drop guide either on here or f150online that went over how to for a particular ammount of drop. ill see if i can find it.
found http://www.f150online.com/forums/str...8-f-150-a.html
found http://www.f150online.com/forums/str...8-f-150-a.html
Last edited by Rubicon35; 05-22-2012 at 06:03 PM.
#7
F150 SUSPENSION GURU
ive been doing big drops since late 03 on the 04 ups. on the 5.5 drops in front spindles/control arms you will be fine but you will need to run 20 inch wheels.
Trending Topics
#9
Drivin' my Fiso
Thread Starter
Join Date: Apr 2012
Location: Kansas City
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Mines an 01 sorry i forgot to specify, all i ahve seen though says 18 and up, i plan on running 20" fr500 but i really dont wanna run those in the snow
#10
F150 SUSPENSION GURU