NORCAL SS

Weird said you posted question today at 910 am my time.

Summers22

iTrader: (2)

3/4 for a 96 Ford Ranger 2wd ext cab with the 3.0 V6. Price with shocks front and rear. Thanks

NORCAL SS

ill shooot you a pm

ClutchF150

hey i want to slam my truck right down or control ride height as i live up north and need it to sit around normal during winter but i want to put 24 on n have air ride to slam it down if i feel like it cruising or parked any help would b great

2013 4x4 XLT supercab 5.0
slammed with air ride control ride height
$5000-$7000
any advice or parts or how to or kits would be greatly appreciate

new to fourm

NORCAL SS

sorry cant help with bagged set up. Only do static. With 4x4 with bags in front good luck. The spring perch can only go so low before it hits the axle shafts so that means that you will have to have less psi in bags to have a low ride height which rides worse. Ive replaced many bagged set ups over the years back to static and owners said they should of not wasted their money in many cases

1lowranger

Bagging a truck that isn't 4wd is far superior then a stiff *** static drop any day of the week. That is if you know how to set it up properly, most don't.

NORCAL SS

none of the kits i sell for the 04 ups are stiff for 4x4

ClutchF150

so what sorta kits do you say i should look at going with i want to look good ride good with 22-24 rims and whats my price range now

NORCAL SS

as with any 04 up truck i need to know what the truck measures from ground to fenderlip all around and also in rear if you have a lifting block. Tell me that can i can dial in a kit fo ryou

maxpat82

the only bagged setup that would work for a 4x4 is the ridetech one.

Always depend on what you are doing yourself(fabrication, welding, air plumbing, electrical) and how low you want to go.

forget about laying frame on a 4x4....anything lower then 3-4" in the front and the axle start to bind.