2000 f-150 dropped

I have recently purchased a 2000 f150 XL 2wd and one of my friends said that they put the leaf spring under the axle and u could put it back to factory lift which would be a 6 inch lift from where it is now. And he said they cut the front springs. The fronts sits about 2 inches higher than the back. Is there any way I could just raise the back up 2 inches. And will it make the front tires wear on the inside or once I got to get it allign will it fix that?

HTXfX4

You would have to take the flip kit off the back then lower it 4" with drop shackles and hangers.

2000 f-150 dropped

I have a flipp kit in the back about a 6 in drop. Will I be able to pull a 12 ft trailer with about 900 pounds on it without my tires rubbing.
Here Is a link to a picture of one in the bed click download then direct download and it will pop up

http://db.tt/xbJtje5w

NORCAL SS

are you sure the rear leafs are under the axle?

2000 f-150 dropped

Yes, positive why

NORCAL SS

ok in rear you will need to flip the axle back on top of the rear end unless you want to do a 1 inch lifting shackle

brown_bomber66

1992
2wd
$600
leveled to natch the front

NORCAL SS

so you want a 2/4 or 3/5?

brown_bomber66

2/4 I think...

2011-HD

need to 1/2 or 2/3 drop 2011 harley 4wd.
can I drop front by short springs? and rear by drop shackles only?