Any Ford Lowering questions post here 65-2015 trucks.
#1812
Hello, I am looking to lower my truck.
1) 2015
2) 2wd Lariat Supercrew
3) 2/4 drop
4) 1500 or less would be nice
5) belltech or djm item or both doesn't matter. Thinking of a rear sway bar as well.
Thanks,
Tim
1) 2015
2) 2wd Lariat Supercrew
3) 2/4 drop
4) 1500 or less would be nice
5) belltech or djm item or both doesn't matter. Thinking of a rear sway bar as well.
Thanks,
Tim
#1813
F150 SUSPENSION GURU
Thread Starter
#1814
F150 SUSPENSION GURU
Thread Starter
in rear i have the flip kit and shocks by belltech but in front nothing at this time
#1815
I have a 2010 supercrew and one main issue I have is when I put in reverse I feel a vibration coming from the rear end what's the best way to figure out if your pinion angle is set correctly?...I'm about to go to a driveshaft company and built me a new one because so fuss rated with this issue and help would be appreciated.
#1816
F150 SUSPENSION GURU
Thread Starter
I have a 2010 supercrew and one main issue I have is when I put in reverse I feel a vibration coming from the rear end what's the best way to figure out if your pinion angle is set correctly?...I'm about to go to a driveshaft company and built me a new one because so fuss rated with this issue and help would be appreciated.
#1818
F150 SUSPENSION GURU
Thread Starter
you would do the 2/4 set up which is adjustable from 0-3 front and rear will lower acuatlly 5 inches due to removing the block. 285 45 22 will work fine or 305 30 22.
the 2/4 kit is 625 shipped then i shoot you a invoice and info and you send that into the rebate center and they give you a 150 dollar credit card.
#1819
Junior Member
Join Date: May 2015
Location: saskatchewan canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
hey id like that
right now there is a 150 rebate in july for the complete belltech kit.
you would do the 2/4 set up which is adjustable from 0-3 front and rear will lower acuatlly 5 inches due to removing the block. 285 45 22 will work fine or 305 30 22.
the 2/4 kit is 625 shipped then i shoot you a invoice and info and you send that into the rebate center and they give you a 150 dollar credit card.
you would do the 2/4 set up which is adjustable from 0-3 front and rear will lower acuatlly 5 inches due to removing the block. 285 45 22 will work fine or 305 30 22.
the 2/4 kit is 625 shipped then i shoot you a invoice and info and you send that into the rebate center and they give you a 150 dollar credit card.
and how do we go about this and how do you ship will i be expecting any other charges
#1820
2010 f150
Yes it is dropped I use to have the djm 5.5 drop which included the lift shackle and belltech 3.5 in the front but I switched the rear with a crown suspension kit due to the geometry issue thinking it would maybe fix it, it helped a Lil doesn't do it as much but what I did notice is that where the carrier bearing is at the driveshaft goes down and then up to my axle like if the carrier bearing bracket is to low possibility?? Any opinions?