Originally Posted by loadchris83

1) what year truck? 2014
2) 2wd or 4wd? 2wd
3) how low do you want to go? 2/4
4) budget you want to be in? $800 give or take (with helper bags)
5) belltech or djm item or both doesn't matter. Belltech AND DJM

I was thinking Belltech struts and rear shocks with DJM flip kit. Going to be towing a travel trailer (5200lbs loaded plus payload) so I was thinking a set of helper bags would be needed.

Originally Posted by ndnboy

Not ready for a 2/4 drop but would like info on 2" shackles for the rear..


1) 2014
2) 2wd
3) 2
4) ??
5) doesn't matter.

Originally Posted by DJM/BELLTECH DIRECT

does the truck have a lifting block in rear?

Originally Posted by DJM/BELLTECH DIRECT

Just need you to answer below questions so I can give you the best answer.
1) what year truck?
2) 2wd or 4wd?
3) how low do you want to go?
4) budget you want to be in?
5) belltech or djm item or both doesn't matter.


Here goes the suspension order page I will be adding pics up shortly
http://www.tbssowners.com/store/inde...ewCat&catId=15

Originally Posted by clpeller

1) 2011
2) 4wd (block removed)
3) as low as I can with struts (is 3" possible?)
4)doesn't matter
5) whatever is better.

Measurements from tire to wheel well are:
PS front :36.5
DS Front:36.25
DS Rear:35.5
PS Rear:35


If i can do 3" on struts, I'd like to do that, and a 2" shackle along with accompanying shocks for the rear.

Originally Posted by ndnboy

Its a stock 2WD, don't see anything like blocks in there....

Originally Posted by DJM/BELLTECH DIRECT

front bellltech 2 inch drop struts
rear 4 inch flip kit
rear shocks

615 shipped to your door