NORCAL SS

Tested and ready to roll. Due to trucks sitting different sometimes a 2/4 kit is needed while other times a 3/4 is needed. 3/5 may end up sitting lower in rear than front so please contact me 415 519 2432 24/7 via text or call or ask your question on this thread.


The kit is $835 shipped for the 3/5 and $850 shipped for 2/4.

The 4 inch has a much bigger hanger and so the increase cost. I use the belltech rear kit because have found the ride to be better with the belltech sp shocks and also they have a carrier bearing or transmission spacer depending on what design your truck is.

DJM 2 OR 3 INCH lower a arms FOR 2WD ONLY.




And rear is the belltech 4 inch or 5 inch flip kit with belltech sp shocks

Any questions feel free to ask

Tony

rockman23

I'd like to LOWER the REAR ONLY of my 2015 f150 4x4---instead of leveling the front, I wanna lower the rear to match the front...Can this be done w/shackles only, I'm guessing a 2" or 3" "shackle lowering kit" for the rear??
I dont anticipate towing anything so I dont need the rearend higher than the front. What are your thoughts??

crankinaway

You could also just remove the rear axle block if there is one installed. A shackle would do the same thing.

NORCAL SS

Please measure truck from ground to fenderlip all around. That will let me know how to dial it in exactly

rockman23

hi mr.DJM/Belltech------I measured from ground to fender lip on my 2015f150---it's 40" from ground to fenderlipREAR--it's 37.25" from ground to fenderlip FRONT...
I would like to lower the REAR only..it is a 4x4 but I dont want any caster/camber issues & early CVJOINT wear from lifting front. I dont care bout lifting my truck, It's currently high enough for me...I just want it LEVEL....letmeknow what you think, thanks!

rockman23

--it does't 'appear to have a significant axle-block(it's only 1/2" tall)--also, not sure if 2" or 2.5" shackles will fit..??

NORCAL SS

No prob just shoot me your zip I'll get price going. Will be shackles and pinion shim

225

I need a set for a 2wd 07 f150 3/5

NORCAL SS

Well came upon a problem. some 15s rears have changed. DJM now has a 3.5/6 kit that works on all 2015s and I no longer at this time will be selling the rear belltech kits for them for the 15s.

front djm 3 inch arms (will give 3.5)
rear new flip kit 6"
rear belltech sp shocks
$800 shipped

The djm rear shocks are little to stiff for my taste.

WILL ONLY WORK WITH 2WD TRUCKS

Please pm me if you have any questions

butts182

DJM/BELLTECH DIRECT I sent you a PM with a problem that I am having with a kit that I bought from you for my '14. It would be great if you would respond