2013 RCSB 5.0 STX Lowered 3/5.5
#1
2013 RCSB 5.0 STX Lowered 3/5.5
Hey guys just picked her up yesterday. Had it lowered and tinted by the dealer. Love this lil truck. Stay tuned as more mods are coming
Here is a sneak peek:
Here is a sneak peek:
#4
Do you know if I can use belltech shackles with that flip kit to lower rear even more?
Future plans: Nothing crazy. Exhaust, intake, wheels, alpine touchscreen, and speakers. Maybe a tune.
#5
F150 SUSPENSION GURU
1) align it
2) elongate the holes
3) used no spacers so its more of a drop and wont alingn
usually the 3.5/5.5 kit sits about even your front looks at least 1 inch lower
Trending Topics
#8
They did not. I prefer the truck lower than higher so that is most likely why they used no spacers. I think I will get some 1 or 2" shackles and get a c-notch done to level it out. Do you think 20x9 +30mm wheels would rub??
#9
F150 SUSPENSION GURU
please look at this install guide
http://www.belltech.com/extras/docs/BBGC/25001.pdf
also if you look at the last page a 3 inch drop requires a 16mm spacer so no spacers means 4 inch drop (09 up) and straight from install sheet (your running no spacer so its like running a 1 inch drop spring)
I just hate to see shops that install these parts and don't set it up right.
#10
Cant Stop Wont Stop
What i learned too late is that f150's wont give you the dropped look that a chevy/gmc will with just a bolt on kit. I have my f150 lowered 4.5 in the front and it still doesnt have that "chevy" look i was going for. Plus i found out my front setup is close to bottoming out and even tho i've widen the alignment holes it still wont align. Freaking sucks but oh well.
The following users liked this post:
Nesian671 (03-25-2013)