2/4 inch drop?
#1
2/4 inch drop?
I bought the DJM kit for the rear and the adjustable struts for the front, my questions are 1. In the back the kit has me dropping the rear down by flipping the rear axle, and then throwing lifting shackles on there... I've got a 4x4 it has stock 2 inch lifting blocks on it already, to drop it 4 inches why not just remove those and use a 2 inch drop shackle? And 2. The adjustable front struts say for 2 wd f150 on the instructions ... will they work for a 4 wd truck? I bought the stuff from you tony if your on here I hope you can help me out?
#2
F150 SUSPENSION GURU
you will have major rake still. By doing the 2 inch front and 4 inch rear it wont have a major rake. the drop struts work for both 2wd and 4x4 and the rear 4 inch djm kit you can adjust pinion angle.
25001 will do up to 3 inches of lowering for both 2wd and 4x4 the 25002 is for 4wd and does only up to 2 inches of lowering. The 25001 i use because its a shorter shock and for a 2 inch drop its better than using the longer shock wiht a 2 inch drop due to where the shock stroke sits.
Also you an just call me if you have questions since I cant get on the board all the time.
25001 will do up to 3 inches of lowering for both 2wd and 4x4 the 25002 is for 4wd and does only up to 2 inches of lowering. The 25001 i use because its a shorter shock and for a 2 inch drop its better than using the longer shock wiht a 2 inch drop due to where the shock stroke sits.
Also you an just call me if you have questions since I cant get on the board all the time.