Would you guys fix or sell?
#11
Senior Member
Thread Starter
Tired of using hand tools, I went out and picked up a 30 gal husky air compressor and some ratcheting air tools. Make it a little less painful lol
#12
Cam tool is a waste of money use a 15/16 wrench to hold the cam and an 18mm to rotate the engine to where all the pistons are in the safety position
#13
Senior Member
Thread Starter
Originally Posted by 97badass
Cam tool is a waste of money use a 15/16 wrench to hold the cam and an 18mm to rotate the engine to where all the pistons are in the safety position
#14
Also I recommend the frpp head change kit it's like $100 for both head gaskets, exhaust gaskets and the bolts. Then you need the timing cover gaskets, reuse the intake manifold gaskets, a small tube of gray silicone, and get a can of kroil for the exhaust manifold studs, have the heads surfaced and make sure you keep the cam caps organized so they go back in the same place
#16
Senior Member
Thread Starter
Yeah the intake gaskets and valve cover gaskets are less then a week old, I just did the heater hose pipe under the intake because my last one leaked when I followed someone's post on here, but I put it back to stock and no leak now, I saw where it was leaking when I had the intake off but I thought maybe it was just moister from the coolant swishing around in the valley, but I guess once I fixed my leak it created that pressure and created a new leak since it's never been pressurized before. It's always had a leak since i bought it, but at this point I've fixed and replaced everything so now the only place it could leak from was the head gasket I guess so that's where it went lol.
#18
Senior Member
Not exactly, - it just goes to prove when you pass bad info to other users, make up stories to support your bad info, put someone who's attempting to help you in a position to figure your BS out isn't easily forgotten. You were busted but not man enough to admit it. If I'm an *** what's that make you? I don't know but yea, I'd rather be the *** in this case.
#19
He may be an ***, but at least he is a smart ***
#20
Senior Member
Thread Starter
Originally Posted by Jbrew
Not exactly, - it just goes to prove when you pass bad info to other users, make up stories to support your bad info, put someone who's attempting to help you in a position to figure your BS out isn't easily forgotten. You were busted but not man enough to admit it. If I'm an *** what's that make you? I don't know but yea, I'd rather be the *** in this case.