Wiring help plz
#12
Idk how it would look if I wired them to the dome light because then they'd all come on even if just one door is opened, but I will try.
Is there a write up on how to do this like which wires is it?
#13
Resident light whore
Even if you wired them into the factory door lights they'd both come on whenever a door is open
#14
cliffords a 4x4
all lights are gonna come on either way, but since youre gonna put the lights on the door you will only see the light of the door thats open
#15
Senior Member
Yeah it's impossible to get only one to come on with the door it's on. If you open one door, they all will come on. That is unless you did some serious modding and fabbed up some type of trigger that trips when only one door is open to control when a light came on. Other than that you can't.
#16
Senior Member
iTrader: (2)
Yeah it's impossible to get only one to come on with the door it's on. If you open one door, they all will come on. That is unless you did some serious modding and fabbed up some type of trigger that trips when only one door is open to control when a light came on. Other than that you can't.
#18
Well the complicated way would be to use the existing door ajar switch and slave a relay to it with its own power feed. The up side your lights will work independent of each other, the down side is the work involved just to accomplish it. check it out, I'm sure you can figure out what i mean in this diagram. Love the idea now you got me ripping my puddle lights out to put these in.