Wiring Foglights with Parking Lights on a 98 F150
#11
Senior Member
Thread Starter
Works like a charm, I'm glad I came up with the idea tapping into the Dark Blue/White wire to trigger the relay. Got the fog's installed, I only wish I went with spots.
Last edited by sherwind2010; 04-08-2015 at 02:12 AM.
#12
Senior Member
Thread Starter
#14
Senior Member
That's what I did as well, - very simple, fast mod that lasts forever. Just have to grind of that little switch stop, if you want running lights/fogs and/or heads separate.... some do some don't, but I like the option to run the lights I want at any given time, with the one factory switch.
#15
Senior Member
They shouldn't be if you aim them correctly. Me and a few other guys on this forum have 6 inch led bars for fogs. As long as you aim them down and away from traffic there isn't an issue
#16
Senior Member
One thing that hasn't been mentioned is to use a decent LED in place of the 9006 35w halogens. True that they're only as bright as daytime running lights, but I wired mine to the nearby parking lights. Low power as to not blow fuses, but enough for effect without blinding oncoming traffic. I was one of the unlucky ones that did not have the fog pre-wire, so it was a no brainier to tie into existing.
Do a search on eBay for "9006 LED" which is how I found mine. Sorry, posting from an iPad, or I'd attach a pic (it's in previous posts of mine).
Do a search on eBay for "9006 LED" which is how I found mine. Sorry, posting from an iPad, or I'd attach a pic (it's in previous posts of mine).
#17
Senior Member
Thread Starter
The following users liked this post:
2thousand5.4 (05-25-2015)
#20
Senior Member
Thread Starter
The following users liked this post:
2thousand5.4 (05-27-2015)