Originally Posted by Jbrew

Those are nice, - as long as you don't get the 4600 series and crank the bars. Those are factory ride height shocks. Cranking the bars will pull them past max, = ****ty ride and you'll go thru bushings. The 5100's are nice.

Originally Posted by Jbrew

Those are nice, - as long as you don't get the 4600 series and crank the bars. Those are factory ride height shocks. Cranking the bars will pull them past max, = ****ty ride and you'll go thru bushings. The 5100's are nice.

Originally Posted by pfoley12

so would you recommend the 5100s for the front with a t bar crank?

Originally Posted by jferg92

ya same here. I need shocks for a 2" level on the front and AAL'S on the back. I have quite a bouncy ride pulling this today. My Oem rancho's are shot!

Originally Posted by Based

I have a 2 inch lift for reference. It was kind of a pain to mount them where I wanted, it's hard to explain in words what I had to do but here's a pic of where it's mounted: http://imgur.com/E8iSgHj http://imgur.com/wLrZVLf I used 3M Super 77 contact adhesive to mount because the panel was too thick so the threads on the light to screw the mounting ring onto weren't sticking out far enough. It will be easy as hell if you already have lights in your doors, but if you don't like I did then you have to tap into the dome light. You can see by the second pic that I had to cut out the back wall enough so that the light could fit. I just used a kitchen knife it was easy. And yes the second pic looks ugly but I've never even looked at that compartment before so it doesn't matter to me.

Originally Posted by Jbrew

Those are nice, - as long as you don't get the 4600 series and crank the bars. Those are factory ride height shocks. Cranking the bars will pull them past max, = ****ty ride and you'll go thru bushings.

The 5100's are nice.

Originally Posted by Jbrew

I don't think you can get 5100's without a lift can yuh?

Regardless, I've heard good things about the 5100's, nothing bad.

Originally Posted by Based

I will do a vid testing the light high up. That's gonna be a high ****in truck man. I think it will still look good. Link to the website I used: http://mrkustom.com/shop/auto-car-tr...d-logo-lights/ They even give you the drill bit so install really aint a thing and for 30 bucks a pair it's not gonna kill you if they aren't what you like.

Originally Posted by Jbrew

Shingles? Yeh, it shouldn't bounce lol....cush cush maybe.

Originally Posted by Based

I will do a vid testing the light high up. That's gonna be a high ****in truck man. I think it will still look good.

Link to the website I used:

http://mrkustom.com/shop/auto-car-tr...d-logo-lights/

They even give you the drill bit so install really aint a thing and for 30 bucks a pair it's not gonna kill you if they aren't what you like.