What did you do to your 10th gen today?
09-25-2016, 11:01 PM
Resident light whore
09-25-2016, 11:33 PM
I was just cruising today and suddenly I feel a misfire. Within seconds my CEL goes on. I park and look at my ScanGauge and it shows a P0353 code. I drive home and lookup the code.
"Ignition coil c primary/secondary circuit malfunction"
So I look on the froums and people are seriously telling other people to pull their PCM connector and/or replace their PCM. Others suggested to look for kinked wires around the A/C accumulator.
So I go outside, pop the hood, push the connector down on the coil, start the truck up and it runs flawlessly haha.
It reminds me of when I looked up my symptoms of my runny nose and others were saying I'm gonna die.
All in all, I'm happy. I need to change my oil since the colder weather has made the valvetrain a tad noisy on startup for a split second.
"Ignition coil c primary/secondary circuit malfunction"
So I look on the froums and people are seriously telling other people to pull their PCM connector and/or replace their PCM. Others suggested to look for kinked wires around the A/C accumulator.
So I go outside, pop the hood, push the connector down on the coil, start the truck up and it runs flawlessly haha.
It reminds me of when I looked up my symptoms of my runny nose and others were saying I'm gonna die.
All in all, I'm happy. I need to change my oil since the colder weather has made the valvetrain a tad noisy on startup for a split second.
09-26-2016, 08:56 PM
Looking for a Henway.
iTrader: (2)
Replaced the Fuel pressure regulator chasing down a long crank till starting issue. Did not fix it.
So now either the check valve in the fuel pump (most likely) or a stuck injector (not very likely)
So now either the check valve in the fuel pump (most likely) or a stuck injector (not very likely)
09-26-2016, 09:01 PM
Posting a DIY is fine, I have no problem with that, and your way probably works (never tried it myself, as I said before, I used a heat gun to take mine off). And no I am not a window tinter, but I do understand how the world works. If you don't /can't/won't do it yourself, you have to pay someone to do it. Expecting them to do it for free is just stupid and ignorant.
As for the rest of your response, how do you know I can't do what you do for a living? You apparently can't even brag correctly, at least say what it is you do that is so great and amazing that nobody else can do.
So for a stream of water containing cleansing agents that is applied to a body part or cavity for hygienic or therapeutic purposes and the container it is in, you seem to fail pretty hard.
As for the rest of your response, how do you know I can't do what you do for a living? You apparently can't even brag correctly, at least say what it is you do that is so great and amazing that nobody else can do.
So for a stream of water containing cleansing agents that is applied to a body part or cavity for hygienic or therapeutic purposes and the container it is in, you seem to fail pretty hard.
09-26-2016, 09:08 PM
Senior Member
Originally Posted by swampaz
. These tint guys are ripping you off when they charge you to remove it. TRUST ME.
Edit* I always enjoy learning to do things myself but I'm not going to call someone's business a ripoff just cause I can do it myself. I helped my dad build our house, I wouldn't be caught dead calling a contractor a rip off. TRUST ME it's easy building a house.
Last edited by fordguy2100; 09-26-2016 at 09:10 PM.
09-26-2016, 09:08 PM
Senior Member
Originally Posted by swampaz
Well Blupuffer, I'll say this I don't work in the private field, and I work for a large organization, you may know who they are and you may not. So, you go on the defense when someone post a DIY,then you change your tone when you realize you sound like a ***** ( to put it nicely). Put it this way if you don't like... TOO BAD. And I never said use a cleaning agent. Read before you respond. So,Take your ball and go home little boy.
The following 3 users liked this post by Cmanjr:
09-26-2016, 09:11 PM
Senior Member
Originally Posted by Cmanjr
get off your high horse and move on. We don't have time to sift through your bullsh-t arguing back and forth. Be done with it.
09-26-2016, 09:29 PM
Senior Member
Originally Posted by fordguy2100
Dang wish I could thank thru mobile
If they wanna keep going at it, there's a private messaging system for a reason.
09-26-2016, 11:43 PM
Senior Member
Originally Posted by swampaz
Well Blupuffer, I'll say this I don't work in the private field, and I work for a large organization, you may know who they are and you may not. So, you go on the defense when someone post a DIY,then you change your tone when you realize you sound like a ***** ( to put it nicely). Put it this way if you don't like... TOO BAD. And I never said use a cleaning agent. Read before you respond. So,Take your ball and go home little boy.
anyway I recleared my headlights a few days ago and cleaned the inside with rubbing alcohol ( so there's no water spots ) but I couldn't get the app to work. They seem to light up the road a tad better up close now. ( low beam without fogs in the pictures )
Last edited by Fordfan2006; 09-26-2016 at 11:49 PM.
09-27-2016, 12:04 AM
Sh!tllbuffout
I work at a tint shop for a couple of years as a 2nd job and the reason they charge so much is due to the older tints taking aaaalllllll ddddaaaaayyyyy to remove. Mainly that purple crap (faded tint) they used to have. It would come off in little slivers and smelled aweful.
Fwiw we would use soapy water, razor blades and 0000 steel wool.
Fwiw we would use soapy water, razor blades and 0000 steel wool.