What did you do to your 10th gen today?
Senior Member
What did you do to your truck today?
Originally Posted by pon55
Generally called dog tracking. Usually seen from wrecks not repaired correctly.
Originally Posted by Wolvee
With a Solid live axle they are not usually adjustable and usually + or - angles are from sort of damage or worn parts. Worn bushings, Bent Leafs, frame damage, brackets or bolts can all affect the thrust angle.
Essentially the rear end isn't angled correctly. Mind you on my truck I'm only talking .11 degrees on my truck. I'm not too worried.
I'm also just starting to research this stuff now.
Here's a simple graphic that explains thrust angle.
Essentially the rear end isn't angled correctly. Mind you on my truck I'm only talking .11 degrees on my truck. I'm not too worried.
I'm also just starting to research this stuff now.
Here's a simple graphic that explains thrust angle.
Senior Member
What did you do to your truck today?
Originally Posted by 02_Black_On_White
Another because I can't get enough...
What did you do to your truck today?
Originally Posted by Cmanjr
Oh sweet baby Jesus. Your truck looks so damn good with those wheels and tires man. Great choice of setup.
Senior Member
What did you do to your truck today?
Originally Posted by 02_Black_On_White
Thank you man! I appreciate it. I was a bit skeptical but I'm gonna figure out how to get the brushed aluminum accents white. That's the next step.
I did get to do a little trailing tonight with the family and about half my gear in the back. It feels like a completely different truck. :0)
Good shocks really do make a difference. [MENTION=76842]Carcrazygts2[/MENTION]
Good shocks really do make a difference. [MENTION=76842]Carcrazygts2[/MENTION]
Senior Member
iTrader: (1)
What did you do to your truck today?
Senior Member
Senior Member
..and that's half of the problem. Rings, old gaskets & other seals end up depending on the gap filling mileage carbon.
Using BG44k does get rid of the carbon but it doesn't add material to the engine that years of wear have taken away.
It's a gamble to do this kind of service to an engine that's never seen it before.
Using BG44k does get rid of the carbon but it doesn't add material to the engine that years of wear have taken away.
It's a gamble to do this kind of service to an engine that's never seen it before.
Also, once you weight the differences pertaining an engine high on carbon vs clean, a dirty engine won't go as far or be as healthy getting there IMO.
I'm a firm believe in the "BG Service", - more so , the "Motorvac Service". Sort of proved that one as my engine has 319,000 miles and still doesn't use oil between changes.
It's just as you said here about snake oil ,-
I agree, maintenance neglected engines for long periods of time you can't come come back from, - there's nothing you do to get it back.
A high mileage well maintenance engine can go even further with the correct procedures. The BG and Motorvac Services keeps them clean in the right spots.
There's a couple proven products that work which one might refer to as snake oil.
1. For the crankcase. A product that keeps the internals clean and either works slowly or keeps it's clean depending upon condition. It's called Auto RX. If you use it once in awhile it really works.
2. The other is Techron injector cleaner. That actually does what it says it does as well.
Yea, that's really the only two I know of lol.
Also remember, that crap doesn't just disappear. It has to go somewhere. Usually right into the Catalytic Converters. If someone already has high mileage CC's it can cause it to clog.
Besides what I've seen it do to other engines, It happen with my wife's 200k mile Honda Pilot.
The vehicle ran perfectly fine but AutoHoe sold her a bottle of Lucas fuel treatment with new wipers. I knew it was a bad idea but I put it in the tank anyway. (what could it hurt, right?) Three days later she was on the Highway, it started bogging down and it wouldn't go over 35mph. By the time I made it to her, it wouldn't even go 15mph.
The only thing I did to fix it was gut the cat. It previously never had a CEL and was a perfect college car for her. She drove it another 115k+ miles before trading it in.
Now granted it was a high mileage limited space CC but that's a perfect example of one of the unintended consequences of using these types of treatments.
Besides what I've seen it do to other engines, It happen with my wife's 200k mile Honda Pilot.
The vehicle ran perfectly fine but AutoHoe sold her a bottle of Lucas fuel treatment with new wipers. I knew it was a bad idea but I put it in the tank anyway. (what could it hurt, right?) Three days later she was on the Highway, it started bogging down and it wouldn't go over 35mph. By the time I made it to her, it wouldn't even go 15mph.
The only thing I did to fix it was gut the cat. It previously never had a CEL and was a perfect college car for her. She drove it another 115k+ miles before trading it in.
Now granted it was a high mileage limited space CC but that's a perfect example of one of the unintended consequences of using these types of treatments.
Last edited by Wolvee; 06-03-2015 at 10:57 AM.
Took the passenger exhaust manifold off today. After two days, I can say I've had enough. No studs, but bolts ... which means it was already changed. Exhaust manifold was completely cracks all around on Cylinder 1.. (front).
However since I cut the heads off the bolt as they were too rusty, I'm sort of stuck! I've got all of the bolt studs out without an issue but 1... Its about 1 inch of it sticking out to grab it and I've been soaking it in PB + 50/50 Acetone and ATF ... nothing.
Any suggestions? my vice grips are as tight as they are on there and I'm just pealing off stuff.
However since I cut the heads off the bolt as they were too rusty, I'm sort of stuck! I've got all of the bolt studs out without an issue but 1... Its about 1 inch of it sticking out to grab it and I've been soaking it in PB + 50/50 Acetone and ATF ... nothing.
Any suggestions? my vice grips are as tight as they are on there and I'm just pealing off stuff.