Suggestions
#81
#82
Senior Member
I think it would look better with out the need bars, just my opinion.
I'll try to post up some pics of all my LEDs so you have an idea of what it will look like
I'll try to post up some pics of all my LEDs so you have an idea of what it will look like
Last edited by 2thousand5.4; 08-24-2014 at 08:50 PM.
#87
Senior Member
Thanks
Check out [MENTION=45175]BrowningSCrew[/MENTION] and his LED thread. He started all the LED stuff.
Everything was pretty easy to do I wired them to a switch the to the ignition fuse so the interior ones automatically go out when you shut the truck off. Then the bed lights are tied into the door lights. The hardest part is changing the cluster over to blue, ands that's because you have to sand off all the green film.
Check out [MENTION=45175]BrowningSCrew[/MENTION] and his LED thread. He started all the LED stuff.
Everything was pretty easy to do I wired them to a switch the to the ignition fuse so the interior ones automatically go out when you shut the truck off. Then the bed lights are tied into the door lights. The hardest part is changing the cluster over to blue, ands that's because you have to sand off all the green film.
#88
Senior Member
Thread Starter
Thanks Check out [MENTION=45175]BrowningSCrew[/MENTION] and his LED thread. He started all the LED stuff. Everything was pretty easy to do I wired them to a switch the to the ignition fuse so the interior ones automatically go out when you shut the truck off. Then the bed lights are tied into the door lights. The hardest part is changing the cluster over to blue, ands that's because you have to sand off all the green film.
#89
Senior Member
The ones in the pic are some generic brand off amazon. $50 for the pair. They are pretty bright
The following users liked this post:
LOUDnLIFTEDf150 (08-24-2014)
#90
Senior Member
Well I did everything over about 2 months, but in total including off road light, probably about 5 hours. But most of that time was in the gauge cluster, and it was also my first time doing electrical stuff. So if you are good with wiring it won't take that long
The following users liked this post:
LOUDnLIFTEDf150 (08-24-2014)