FX4MAN2002

No matter where you rotate them to, the pattern stays the same. These tires last a LONG time. My dad had some on his F350 and he got 45k miles out of them. And they are absolute KILLERS in the mud. I'm gettin some 35s on my truck next

ibd2328

iTrader: (2)

You can rotate any asymmetric tire as log as they are the same size and mounted on the same rims and on the same side of the vehicle. Almost all tread patterns have a rotational guidleline, just requires you to swap the same sides, i.e. just change the front driver with the rear driver side

I doubt you have offset or staggered rims so asymmetrical tires should be your least concern.

With proper rotation I wouldn't be surprised to see you get about 40k out of the kevlars with general driving.

kurtay123

haven't posted on here in a while. give me some suggestions on what to do!

bubbabowman

either paint your front valence white or black i think white would be kinda cool and maybe tint your windows if there not already and paint your grille black

BROWNINGFX4

Black toolbox, step bars, fx4 rims

02kingranch

Paint your valence white, get rid of the door trim, but most importantly turn your tires around and get rid of the white letters

kurtay123

thank you I will look into those ideas! here is my sound system setup.

pioneer AVH in dash,

in the front I have infinity reference 6830cs. as you can see I mounted the mid range in the door and drilled a whole for the wires. it doesn't get in the way at all. I also mounted the tweeters on the upper part of the door. it doesn't get in the way of anything either

the back speakers are infinity reference 9632cf

the sub is a kicker 10TCVT102 powered by a Rockford Fosgate Prime R250-4

this system is amazing! I recommend this for everybody.

castrol

I need a sub. How did you get it in there?

kurtay123

It comes in the box already and its a low profile box for trucks. It fit perfectly under the back seat behind the driver seat. i mounted it with some brackets that i got from lowes but i bent the brackets myself so it would be better. ill get better pics of it later today to show you

Almighty

Kurtay, how hard was it to fit that double din hu? Everywhere I read it says they don't fit in our trucks