Show'em Off!!! Post up 97-03 trucks!
Senior Member
Crap.... Was looking forward to that 5.8 swap. How did I miss this build?
Senior Member
iTrader: (1)
It's been a long time since I've posted pics on my current build. So I figured now would be a good time.
Besides a little bit a wiring left, she's almost ready for a first test run.
Apologies that the photos aren't in order, i uploaded them from my phone
https://www.f150forum.com/g/album/4849078
Besides a little bit a wiring left, she's almost ready for a first test run.
Apologies that the photos aren't in order, i uploaded them from my phone
https://www.f150forum.com/g/album/4849078
Senior Member
iTrader: (1)
Looks like it was meant to be there.
Member
Join Date: Oct 2015
Location: Grande Prairie, Alberta
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Senior Member
iTrader: (1)
There isn't a lot of room under the hoods on the tenth gens with the intended motors so i know it had to be close.
I hope you have a build thread because i have tons of questions that i would hate to make you answer twice.
Member
Join Date: Oct 2015
Location: Grande Prairie, Alberta
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I don't have a thread unfortunately. Just a few photos on my profile. Never really got the detailed pictures I wish I had
Senior Member
iTrader: (1)
Member
Join Date: Oct 2015
Location: Grande Prairie, Alberta
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I have basically stripped all the wiring out of a wreck 95 f150 so it will more or less be a plug and play set up, besides doing a gauge cluster retro fit or build one. The motor is stock besides the egr and smog pump delete. My plan for that is to finish the truck and make sure everything works as it should then build up another 5.8 for a quick swap later on.
Senior Member
iTrader: (1)
I have basically stripped all the wiring out of a wreck 95 f150 so it will more or less be a plug and play set up, besides doing a gauge cluster retro fit or build one. The motor is stock besides the egr and smog pump delete. My plan for that is to finish the truck and make sure everything works as it should then build up another 5.8 for a quick swap later on.