Replacing the climate control light bulbs
#1
Senior Member
Thread Starter
Replacing the climate control light bulbs
Is it possible/how hard is it to replace the bulbs behind the climate control? I am looking at buying a truck and it appears that the bulb on the far right, behind the right side of the air vent position ****, is out. It is dim compared to the other side.
#2
Junior Member
Join Date: May 2009
Location: Hemet, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I do know that it's possible though.
#4
Bleeds FORD Blue
the bulbs are just little peanut bulbs. Theres 3 of them. Remove the two screws holding the climate control in, and twist the bulbs out. I had to replace one about 6 months ago. I think it was like 40 cents from the dealer, but the only reason I got it there was cuz I happened to be picking something else up.
#6
2000 F-150 XL 4.6 V8
Join Date: May 2009
Location: Tylerville, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i have a 2000 and mine had jsut 2 bulbs all u do is pop the trim off take out the 4 screws for the control and idk about other trucks but i couldnt pull the climate control out very far and didnt want to unhook the wires so if u try and sqweeze ur fingers where the two bulbs are just turn ech bulb about half the way around and they come out but it is a tight fit
#7
Senior Member
i have a 2000 and mine had jsut 2 bulbs all u do is pop the trim off take out the 4 screws for the control and idk about other trucks but i couldnt pull the climate control out very far and didnt want to unhook the wires so if u try and sqweeze ur fingers where the two bulbs are just turn ech bulb about half the way around and they come out but it is a tight fit
Trending Topics
#8
Senior Member
iTrader: (2)
Yes this is correct...I have the same problem in my 02...just watched a video on utube & it looks easy. The trim panel pulls off by grasping the upper corners & pulling straight back then you need a Torx bit to remove the four screws for the climate control the video showed him removing all the plugs & getting the panel all the way out. just 2 bulbs to replace, Think I will do mine today.