BFP F150

Has anyone been able to install light bars in the fog light openings on the 97 I've seen them on the newer bumpers with 6inch for lights buts never on the 12in fog lights. Please help

Carcrazygts2

I dont think the openings are 12"

MGD

1. Not DOT approved.

2. They'll glare like crazy if you use them in oncoming traffic.

3. Light bars make chitty fog lights.

4. Rigid make 100% legal, DOT-approved duals that provide a spectacular fog-specific beam pattern that won't blind everyone.

They will fit nicely, and likely provide more actual lumens than the cheap chinglish fleabay no-name fake-Cree emitter POS bars that flood the market.


MGD

Ariat

Here is Browning's write up for the 6 inch fogs. Go off of that.

https://www.f150forum.com/f6/99-03-l...nstall-201669/

BFP F150

thank you I think with flood light fog lights it should be ok but probably still illegal but something I still want to do

Ariat

Yes, flood pattern. Idk about legality. Check with your local law enforcement..

MGD

Again floods are indiscriminate blobs of light scattered everywhere - and hence entirely unsuited on occupied roads with oncoming traffic. If you switch 'em off, fine. But a lot of folks don't.

True fog beam patterns don't have that concern. Go find McDavis's beam shots to see what i'm referring to.

MGD

Carcrazygts2

Dont cheap out and buy a quality LED driving light. From a company such as Rigid.

dopewaffle

iTrader: (-1)

Can you take a picture of your bracket for your fog lights?

BFP F150

rigid are the best but there very expensive, I bought two I have from rough country that I'm very happy with but I'm always looking to find quality for what I can afford, I also want bet LED covers, I think it would look good in the fog light openings with the rest of my lights