OBDII connection is dead!
#1
Member
Thread Starter
Join Date: Sep 2011
Location: San Antonio, TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
OBDII connection is dead!
Went to Advance Auto to have a OBD test run for any codes. My connector in the cab where the tester plugs in does not work. Any suggestions on how i can get this running so i can check for codes? is there a fuse that runs this? Any advice will be appreciated. Thanks.
#3
Senior Member
Your truck, like mine probably doesn't have a fuse map anywhere in it, don't bother looking for one in the owner's manual either because it isn't there, ford dropped the ball on it. It's the only 25A fuse on the panel by the driver's door. It's most likely burned, just like mine lol.
#5
Senior Member
lol my manual must be missing a page, I had to use alldata to find out which fuse it was without pulling all of them. Odd thing is, the power port right next to the lighter works, but the lighter port does not.
Trending Topics
#9
Member
Thread Starter
Join Date: Sep 2011
Location: San Antonio, TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the great info guys. I will check that fuse, I had no clue. I do have a map of the fuses for my 03' 5.4L screw. It shows Cigar lighter/Data Link Connector on position 3 of the compartment fuse panel with a 20A fuse.
In the power distribution box (under hood) at position 1 "Power Point" 20A fuse. What does this fuse control?
In the power distribution box (under hood) at position 1 "Power Point" 20A fuse. What does this fuse control?