You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Went to Advance Auto to have a OBD test run for any codes. My connector in the cab where the tester plugs in does not work. Any suggestions on how i can get this running so i can check for codes? is there a fuse that runs this? Any advice will be appreciated. Thanks.
Your truck, like mine probably doesn't have a fuse map anywhere in it, don't bother looking for one in the owner's manual either because it isn't there, ford dropped the ball on it. It's the only 25A fuse on the panel by the driver's door. It's most likely burned, just like mine lol.
lol my manual must be missing a page, I had to use alldata to find out which fuse it was without pulling all of them. Odd thing is, the power port right next to the lighter works, but the lighter port does not.
Thanks for the great info guys. I will check that fuse, I had no clue. I do have a map of the fuses for my 03' 5.4L screw. It shows Cigar lighter/Data Link Connector on position 3 of the compartment fuse panel with a 20A fuse.
In the power distribution box (under hood) at position 1 "Power Point" 20A fuse. What does this fuse control?