jsack12

So I found a website that still has set of m/t classics for our trucks and I think I'm gonna buy them before someone else snatches them. They don't come with lugs tho. I looked on Amazon for lugs and a lot of the reviews said they rusted but I was wondering what your guys personal experience with them is. I would like to get a locking set if I can. Also confused on what size I need. Thread size and the depth size i need.

caderoderick13

what year is your truck?

jsack12

97 which I believe is 12 mm?

akdoggie

You lug size is 12 mm x 1.75. I use the same on my 98.. Later trucks (late 99 and up) use 14mm x 2.0.

caderoderick13

mines a 97 also, i bought these a couple months ago, and also bought some lug nuts from this same seller last year for my dodge and never had any problems with them
http://www.ebay.com/itm/250829506407?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

jsack12

so 12 x 1.5 lugs won't work then? Even with the rim on it?

jsack12

Because most of the stuff online is 1.50. I'm having trouble finding 1.75

jsack12

I found a set of gorilla lug nuts. Says there 1.75 but the inside depth is actually 1.4 and that's not gonna work will it?

akdoggie

That is plenty deep for your studs. You have to have 1.75 pitch or the lugs won't screw on. It's getting hard to find lug nuts for the 97-99's, but they are out there. EBay has a number of them. Here is the direct link. Good luck.

http://www.ebay.com/sch/i.html?_from...Text=&_sacat=0

jsack12

I found some locking ones on Amazon after a half hour of searching