My Retrofit
#51
Senior Member
Thread Starter
#52
Southern 4 Life
Finally got around to getting the final picture uploaded to the PC.
Final installation with LED mods. This is with the parking lamps on during the day. As you can see the LED's are hardly noticable.
Here the Parking Lamps at night
Random angle to show the clearance for the D2S projectors.
Final installation with LED mods. This is with the parking lamps on during the day. As you can see the LED's are hardly noticable.
Here the Parking Lamps at night
Random angle to show the clearance for the D2S projectors.
#54
Senior Member
Thread Starter
210* for 10 minutes. Any hotter and the corner assembly not lenses will start to melt. Used a small pocket screw driver on the lower inside corner. Got it to start seperating then back in the oven for 8 minutes at 215*. I did this until in was able to pull the lenses of. Each corner took about an hour
The housing will begin to destort around 235*
The housing will begin to destort around 235*
#55
My Retrofit
Originally Posted by Carcrazygts2
210* for 10 minutes. Any hotter and the corner assembly not lenses will start to melt. Used a small pocket screw driver on the lower inside corner. Got it to start seperating then back in the oven for 8 minutes at 215*. I did this until in was able to pull the lenses of. Each corner took about an hour
The housing will begin to destort around 235*
The housing will begin to destort around 235*
#56
Senior Member
My Retrofit
Originally Posted by Carcrazygts2
210* for 10 minutes. Any hotter and the corner assembly not lenses will start to melt. Used a small pocket screw driver on the lower inside corner. Got it to start seperating then back in the oven for 8 minutes at 215*. I did this until in was able to pull the lenses of. Each corner took about an hour
The housing will begin to destort around 235*
The housing will begin to destort around 235*
#57
Senior Member
Thread Starter
#58
Senior Member
My Retrofit
Originally Posted by Carcrazygts2
I went thru a set of corners before i figured a system out to get them open.