Carcrazygts2

Teaser: Finally got a lense off. So started doing my test fits before they buckets get stripped for paint.



Here is the corner lamps:

Test fitting special stuff


Stripped for paint
[

blupupher

iTrader: (2)

so no clearance issues with the lens?

Not that I am doing it again, but if these fit with minimal work I will kick myself for not doing D2S.
The H1 Mini is a huge improvement over stock and love the light output, but still.

Carcrazygts2

Only spent about 5 minutes with a sanding roll where the bulb sat. The aftermarket basket used a insert to aling the bulb. Once I tool the bulb out I need to clearance about 1/16" of a inche for the projector to pass thru. The hardest part was leveling the projector, and cutting the alignment slot for the alignment plate. I did leave about 3/64" around them so if i need to rotate the projector I can.

I will need to trim the shroud as it wont lock in completely.

Carcrazygts2

Here are some more pictures with a slight teaser. FYI Permaseal is a pain in the ***. What would have been quick and easy has turned into a weekend burning the midnight oil. But progress is being made. On to the pictures.

Fixing the damage from trying to open the first housing:


Painted the second housing:


Painted the shrouds:


A little teaser of one of the many mods I am adding to the the entire process.


The colors I used are the closet match I could get to my truck minus the metallic. I didnt really feel the need to special order paint just for this process.

charliedyal

Looking great brother. Sweet upgrade.

Wolvee

What does your truck look like? I have the same Harley Heads.

Edit: I found it, You should post more pictures of it. That's not a very common color. ..at least it's not posted here very often.

Ariat

Well this seems nice. I'll sub to that.

rcruz3568

Ready to see your progress! I'm seriously thinking about ordering some different stuff for mine... Lol

Carcrazygts2

I'm taking my time. Permaseal was a real pita to deal with. Currently working on getting the other housing fixed and ready for paint. Then I'll be installing the projectors. I allready have my harness installed in the truck and once the aiming and rotation of the projectors are done I'll be finishing them up.

rcruz3568

yeah I still have to rotate mine and finish aiming them. However I managed to break one if my dang bulbs yesterday.... So I'm waiting in my new ones to come in now