Danruff93

This is all you see when you look at my truck at night

01Sport4x

New LED under tailgate light bar. Made for about $5.

99Longhorn

Looks good! But do they work as turn signals and brakes? I paid $70 for mine

01Sport4x

Sure do, I made a light for the left turn and one for the right turn. Got ahold of a old 4 pin trailer connector and wired them to that for the time being, later will had wire to the truck.

Also made under the bed lip lights, pict may be hard to see they're on, but it was around the same cost.

countryboyedition

How did you make that work for your turn signals?

99Longhorn

That's awesome!! What red light did you use?

01Sport4x

The turn signals on our trucks are the same filament the illuminates with the brake lights. It is the color striped wire on the light connector. I was in a hurry and using the 4 pin connector I just connected the left positive (light) to the left turn of the 4 pin. Then same for the right. For hard wiring, I'll use the color striped wire at the tail light housing, and the ground will be the factory ground located on the drivers side frame rail near the spare tire.

The lights used are a 5 meter (16.4 ft) waterproof LEDs. They are ~$10 from eBay. I've used white on my truck and my dad's, green on my brother-in-laws car and now red for my tailgate, then soon red on a '99 SD tailgate as well. They are super easy to work with. Correct me if I'm wrong but BrowningSCrew has used them as well and has good luck out of them.

f1504L1F3

just finished my bedlights today

Ajaxs1988

Nice! That's a good looking bed liner too, what is it?

f1504L1F3

thanks. basically linex, just a branch off of it.