Lightning Headlight MH1 Projector Retrofit guide!!!
#231
The following users liked this post:
Luckyse7ens (06-20-2014)
#232
Senior Member
The lights themselves look amazing and function well just need to adjust them. I just had to sand a little, it's what is in black in this picture. I also need to figure out the high low beam issue, I already tried switching the white and blue wire but will try again when I get either a new pin or whole new connector for the input plug.
#233
Resident light whore
Thread Starter
The lights themselves look amazing and function well just need to adjust them. I just had to sand a little, it's what is in black in this picture. I also need to figure out the high low beam issue, I already tried switching the white and blue wire but will try again when I get either a new pin or whole new connector for the input plug.
#234
#236
Resident light whore
Thread Starter
Finished up the assembly and install of the MH1 retrofit I did for my buddy's 02. The chrome was a PITA to do but it looks killer in a really subtle way
Attachment 332889 Attachment 332890 Attachment 332891
A note to anyone doing this they've changed the harness up and there's a ballast and control box for each side. You have to switch the white and red wires on the input plug to get the high beams to work.
Attachment 332889 Attachment 332890 Attachment 332891
A note to anyone doing this they've changed the harness up and there's a ballast and control box for each side. You have to switch the white and red wires on the input plug to get the high beams to work.
#238
Resident light whore
Thread Starter