1fiddy97

Alright so i have a set of 20x12 with -44 offset wheels and some 33/12.50 mud tires on the way to be delivered wed. I've been looking at this lift http://jdautoandtruck.com/maxtrac-su...d-k883553.html
And was wondering if i could keep my coil spacer with this lift without causing problems and clear my set up no problem.. If not any ideas? Thanks!

Btw my truck is a 97 150 2wd with the 5.4 xlt and i beleive is a 770 edition?

greenheadkiller98

No. You can run either the coil spacer, or lift coils, the angles become far too much with both.

5.5" will be plenty of lift with 33/12.5.
I ran 35/12.5 on stock rims with 5.5"

1fiddy97

What wheel offset and width did ypu have? One of the people i talked to said with that width and offset i would probly have to do a nice bit of trimming?

1fiddy97

Crap sorry didnt read good enough i reckon, do you have any pictures?

02_Black_On_White

how's this for offset? I ran 33x12.50's on 20x12's with a 1.5" spacer with a leveling kit... I also trimmed a ton... This is 3" spacers, 20x12's and 36x15.50's... -you're 2wd so I really can't speak for what's going to rub and what's not, all I can really do is tell you my experience with 4x4

1fiddy97

No ****, thats sick! What setup?

1fiddy97

my bad for asking when its been answered, i guess my data aint loading the page fast and all it shows is the first sentence when i first see it but thats still a sick truck!

02_Black_On_White

it happens sometimes, I edited to post because I accident sent it that's probably why. Even with the 20x12's and 33's you'll probably be replacing the hubs and bearings/seals in the rear fairly soon. But if stance is what you want then welcome to the stressed suspension family haha.

1fiddy97

Haha i was just looking for a nice look! Is it really going to wear on my truck that bad?

02_Black_On_White

with the same exact setup your about to run, my front hub and both axle seals blew within 10k. How many miles are on your truck?