Igntion key part number
#1
Senior Member
Thread Starter
Igntion key part number
I was wondering if anyone happens to know the part number for the ignition key. I'd like to order one but I can't find an original one anywhere. It is a PATS key.
#2
Moderator
This one will work good. No Ford logo on it but the 4C chip is what you need for the 99-03 F150. What year is your truck?
#3
Senior Member
Thread Starter
It's a 03. But I'd kinda like one with the logo I plan on getting a fob too and having a new set and i don't really trust aftermarket ones. Too many reviews of them not working or working then quit after awhile (chip failing or not being readable )
#4
Moderator
Amazon.com: 1998 1999 2000 2001 2002 2003 Ford F150 F250 F350 Un-Cut Transponder Ignition Key (DIY Programming): Automotive
Here's one with the logo. Its $9 so you'll probably just have to take a risk. Probably 90% of the bad /cant program reviews on line are from someone doing something wrong in the programing process. YOU MUST HAVE TWO FACTORY (from my understanding cloned keys will not work for programming even if they do start the truck) KEYS or else you WILL have to have a dealer or someone with the right computer to clear and re program the new keys. Unfortunately I don't think you can buy a FACOTRY blank, and I could not find the part number anywhere. I went through something similar not to long ago. I purchased this key http://www.ebay.com/itm/321756655586?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT and did some modification to make it fit the collar around the ignition. I can tell you if the key has a 4C chip it will program if you follow the correct directions to a T.
Last edited by BadFish523; 04-07-2016 at 12:10 PM.
#5
Moderator
I even called a couple Ford parts dealers and specialists they told me for security reasons (don't understand what security reasons) I could not get a factory un cut key or key part number.
#6
I've bought 6 cheapo ebay keys for my fords, they all work fine, just need to follow the directions.
hard part around here is getting somebody to cut a pats key, they all say they can't do it because they can't program it.
I finally got the local locksmith to cut me one and then he watched me program it. now he cuts them for me no questions asked.
hard part around here is getting somebody to cut a pats key, they all say they can't do it because they can't program it.
I finally got the local locksmith to cut me one and then he watched me program it. now he cuts them for me no questions asked.
#7
Senior Member
Just go to your local ford dealer with an id and proof of ownership and buy the right parts the first time.
Last edited by jstockert; 04-07-2016 at 08:46 PM.
Trending Topics
#8
Senior Member
If you take your title with the truck and have 2 original keys it won't cost much. If you don't have 2 original keys you will either have to get it reprogramed or go aftermarket and clone the one you have.
#9
Senior Member
Didn't Home Depot (larger stores) have a new key machine last fall, that could program keys? I read somewhere and commented on it online, but where I can't remember. I believe it was either a store in Texas or Ohio, that were the first to get them. They were suppose to give the blank, the programming and everything for 29.95 or so. Do any of you have one of those HD's around your area that have these machines yet? It's been in the past 5-6 months since I read that.
#10
Looking for a Henway.
iTrader: (2)
Didn't Home Depot (larger stores) have a new key machine last fall, that could program keys? I read somewhere and commented on it online, but where I can't remember. I believe it was either a store in Texas or Ohio, that were the first to get them. They were suppose to give the blank, the programming and everything for 29.95 or so. Do any of you have one of those HD's around your area that have these machines yet? It's been in the past 5-6 months since I read that.
As for the OP, I have 3 keys I bought off eBay and use with no issues. Less than $18 for all 3 keys, another ~$8 to get them cut at the local ACE Hardware, then brought 1 to my mechanic to program it and the original key to the truck (he charged me $40). I programmed the other 2 myself. 1 key has the Ford logo on it, the other 2 are just flat at the key head (one is red, and has a red fob, it is my spare I leave in the garage, the other is pink with a pink fob for my wife's key ring)
Last edited by blupupher; 04-08-2016 at 03:30 AM.