TBW2828

I Have A 97 F150 4x4 Extended Cab. If I Turn My Lights On The Driving Lights Come On But No Headlights. If I Switch To My High Beams I Get Nothing Either. However If I Use My Turn Signal Switch And Flash My High Beams I Get My High Beam Lights. Im Thinking Its The Switch But I Just Wana See If Anyone Else Has Had The Same Problem Or Any Input. I Really Appreciate It.

Good old Bill

Welcome to the site. To save a trip to the parts store and throwing money on the counter, you might consider checking all fuses with a test light. Am not sure if the same fuse for normal headlights is the same as for the flash to pass circuit. Just a thought.

TBW2828

Thanks Ill Check That Out. I Did Check All The Fuses But I Didnt Check For Power.

buckethead

It's your Multifunction Switch most likely. I had the same problem with mine for a long while. It's not a cheap part, cost me $240, but I have headlights! It's only 4-6 screws and a harness holding it in...it's pretty easy to fix...takes about 10 mins. Good luck! Incase you're unsure what the multifunction switch is...it's the signal light arm.

Ty

X2, common problem with out trucks.

I did see a diy on cleaning it, but ir was VERY involved....