H-D supercharger
#11
Senior Member
Thread Starter
The guy that has this stuff has the whole truck that was wrecked. As far as I know he is just using the long block and wants to sell the rest. I've seen pics of the int and dash so I assume all the other parts are there ie: ic, pump pullies iac, cc cable, so I'll have to find out for sure what all he has. Can I use the hd dash gauge assembly, I assume it fit just don't know if it all plugs in, and would it have the boost gauge built in? Thx
#13
Factory setups don't have these gauges since they are tuned from the factory so you shouldn't have to monitor these parameters. A lot of these supercharger swaps go onto 4x4s so people change the pulleys to up the boost (more power for heavier trucks). With that, it's a good idea to monitor boost.
The other gauges are needed because you are putting a supercharger on a truck not meant to run it and you need to watch those parameters and work with a competent tuner to get it running correctly.
Other things like the iac extension is something the factory Harley truck won't have. You'll need to make one to reach the location on your Naturally aspirated setup.
Get the fan shroud too, if you can.
You'll need a aftermarket gauge setup like this whether you mount them on the pillar, column, dash, or ceiling
The other gauges are needed because you are putting a supercharger on a truck not meant to run it and you need to watch those parameters and work with a competent tuner to get it running correctly.
Other things like the iac extension is something the factory Harley truck won't have. You'll need to make one to reach the location on your Naturally aspirated setup.
Get the fan shroud too, if you can.
You'll need a aftermarket gauge setup like this whether you mount them on the pillar, column, dash, or ceiling
Last edited by jferg92; 09-09-2014 at 05:17 PM.
#14
[MENTION=52877]4x4dave[/MENTION]
[MENTION=19263]charliedyal[/MENTION]
[MENTION=76903]fordmotorsport[/MENTION]
[MENTION=19263]charliedyal[/MENTION]
[MENTION=76903]fordmotorsport[/MENTION]
#15
[MENTION=103504]jollyroger331[/MENTION]
Where is the listing?
He may have some Harley items I want
Where is the listing?
He may have some Harley items I want
#16
You'll basically need the entire intake assembly. If you can grab all of that with the hoses you'll have a great start. You need a larger MAF, lightning / HD specific throttle cables, larger fuel pump, and the entire heat exchanger assembly including the i/c pump.
#17
#18
Senior Member
Thread Starter
I'll let you guys know when I know the details. It's not listed anywhere , it is the brother of one of my customers. I sold him some stuff when he came over to get it he saw my truck and asked if I'd be interested. I know he has the complete truck, bought it wrecked for the engine but is not using the supercharger pieces. Therefore I think he should have everything, I just need to find out for sure. I know he has the interior to sell.
Ps. He has a possible buyer already but the guy has been dicking around for about three weeks so he said if that guy fell through he would sell it to me.
Thx for the info guy, and if there's something other than the sc parts let me know and I will check with him.
Ps. He has a possible buyer already but the guy has been dicking around for about three weeks so he said if that guy fell through he would sell it to me.
Thx for the info guy, and if there's something other than the sc parts let me know and I will check with him.
Last edited by jollyroger331; 09-10-2014 at 12:56 PM.