fog lights
#4
i did it man, talk to HBT (Hit-By-Thunder) he talked me through it,
heres a thread i made about it man, check it out
https://www.f150forum.com/f6/directi...ts-only-36124/
heres a thread i made about it man, check it out
https://www.f150forum.com/f6/directi...ts-only-36124/
#7
yeah what i did was cut out the wheel that the switch rides on so u pull it out on the parking light setting and then u need to jump a wire in the back which is SUPER easy and it will work!
Trending Topics
#8
Member
Thread Starter
Join Date: Nov 2009
Location: warren county
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
ok so when i grind the plastic part do i grind the whole part even all the way across or do i just do it in spots ? and i was wondering what do u put inplace of were the heat welds to hold thw switch back together ????
#9
No, you just want to cut enough of that bezel off for it to pull down on the parking light setting and then slope it up to where it should be. PM the guy who I mentioned before, Hit-By-Thunder and he will send u pictures of it as well as walk u through it. And u can just add a drop of crazy glue or silicone to those heat welds when ur done