Engine Builders talk.
#1121
[MENTION=48708]2000MTZ[/MENTION] did them off a thermostat and burned through several new ones before pulling his. Also. He also couldn't get the fans to cool the truck enough. He followed the enterprises kit I believe. I'd just like to see someone do it properly with some success as well.
So..seeing two people have issues, the thermostats can be tricky. A switch probably is best for now and keep an eye on those temps running it the first couple times. The factory temp gauge isn't the most accurate
So..seeing two people have issues, the thermostats can be tricky. A switch probably is best for now and keep an eye on those temps running it the first couple times. The factory temp gauge isn't the most accurate
But yeah factory gauge is aweful. Truck could be 160 or 210 and the needle is still in the middle lol. I really want one of those aeroforce interceptor gauges so i dont have to have my SCT plugged in. But the dilemma behind that is there is nowhere else to put gauges lol.
#1122
2000mtz used taurus/windstar cooling fans. I did his write up to a T and had the same issue. Its probably a matter of the fans and the fact theres not a shroud for them although he put weather stripping along the outside of it.
#1123
Yeah it's crazy how much a fan shroud can make or break you. The L shroud i got helps cut down temps more, but still only a band-aid. The NA one is useless since it has to be hacked up like Frankenstein just to fit in my application.
#1124
Are you talking about an E fan for the radiator? I still have the trusty mechanical one lol
But yeah factory gauge is aweful. Truck could be 160 or 210 and the needle is still in the middle lol. I really want one of those aeroforce interceptor gauges so i dont have to have my SCT plugged in. But the dilemma behind that is there is nowhere else to put gauges lol.
Here is his write up as a what no to do
https://www.f150forum.com/f6/how-install-electric-fans-174672/
As for gauges, you just need a setup like [MENTION=35410]rus[/MENTION]
#1125
The thermostat controller for the Efan
Here is his write up as a what no to do
https://www.f150forum.com/showthread.php?t=174672
As for gauges, you just need a setup like [MENTION=35410]rus[/MENTION]
Here is his write up as a what no to do
https://www.f150forum.com/showthread.php?t=174672
As for gauges, you just need a setup like [MENTION=35410]rus[/MENTION]
lmao, yeah that efan setup looks wimpy. I'd be totally sketch running my primary radiator fan on a switch. If a friend drives it then they will have to get a lecture on which buttons and ***** to push lol. Im sure at some point it would be forgotten to be turned on.
The gauge pods look sweet
#1126
lmao, yeah that efan setup looks wimpy. I'd be totally sketch running my primary radiator fan on a switch. If a friend drives it then they will have to get a lecture on which buttons and ***** to push lol. Im sure at some point it would be forgotten to be turned on.
The gauge pods look sweet
Shoulda had a v8 moment. Or a lot more beers after my night lol
#1127
im new on here how do i go to for sale section
I'm interested how much for parts to do swap what kinda power increase I've heard 40 HP ? I'm in st.Pete fla shipping two hundred lbs ?any idea cost on shipping
#1128
Senior Member
#1129
Headers got sold from under me for $10 more...atleast Paypal shows I got my money back
#1130
Senior Member