jferg92

Clean them and run them. Or send them off to be all fancy "sonic cleaned"

Someone on here has them

ibd2328

iTrader: (2)

What info?

charliedyal

Backlash & torque specs for the 8.8 front & 9.75 rear.

jferg92

A forum member had the ford master tech cd series on a group of pdf's and online. He emailed me them but I couldn't get them to convert. He was also giving out his access code to the online series lol

ibd2328

iTrader: (2)

I got it

charliedyal

charliedyal

I'm doing the eliminator when I install my gears. I don't mind being the guinea pig. Seems to be a no brainer to me. I'll also do a write up (with pics for [MENTION=146035]Jackedup00[/MENTION] because, well, because we know how he likes pics) to help anyone else who may want to tackle a project like this.

MyFX4Project

Couple topics here guys...

My truck threw a bank 2 too lean code p0174 last night on my way to work. Still has a slight stutter and shake at certain rpms and my power is gone especially on the on ramp to the interstate. Mpg is terrible at about 10mpg all hwy. Any thoughts?

Also talked the guy on eBay to send me the passenger seat for my expy swap for 150 plus shipping! Gonna need your pics and help [MENTION=64669]jferg92[/MENTION] sent him my zip code and he will be getting back to me with a estimate for shipping.

charliedyal

Have you ever pulled your intake? I'm wondering if there is a leak on the drivers side. If it's just on one side, it's either a leak on that side of the intake or exhaust leak on the same side. Also, how old are the O2 sensors?

Jackedup00

I like pictures because the big words hurt my brain.