Engine Builders talk.
#2781
Senior Member
Need some advise. Have a guy wanting to sell me a PLX dual gauge setup with wideband, boost and obd2 modules for 375. Would this be a good combination for my L setup? It's a lot of cheese and I'm a little cautious.
I already have a boost gauge and am looking at buying a wideband and Fuel pressure gauge. Have a 2 pod pillar and thinking another column pod for a total of 3 gauges.
I like the versatility of the plx system and could sell the boost gauge if need be.
What would y'all do?
Edit: 1- plx dm-6 and 1- dm-100
I already have a boost gauge and am looking at buying a wideband and Fuel pressure gauge. Have a 2 pod pillar and thinking another column pod for a total of 3 gauges.
I like the versatility of the plx system and could sell the boost gauge if need be.
What would y'all do?
Edit: 1- plx dm-6 and 1- dm-100
Last edited by charliedyal; 08-17-2014 at 03:34 PM.
#2782
Just to be sure before I pay $300,this is the kit I need right? http://www.stage3motorsports.com/ARP...-Stud-Kit.html
#2783
#2784
Senior Member
Just to be sure before I pay $300,this is the kit I need right? http://www.stage3motorsports.com/ARP...-Stud-Kit.html
#2785
#2786
Senior Member
And also,this is the cam I'm looking at. http://www.compcams.com/Company/CC/c...?csid=966&sb=0
#2787
That's just their site showing the cams,I'll find them from a site selling them and hopefully they'll be more detailed. A couple pages back someone posted a list of stuff you need for cams,does anyone make an install kit like they do for gears?
#2788
You dont need an install kit. If you are just getting bare heads then you'll need new cam sprockets too. Just get stock ones. Bolt them on when you install the cams. You will need ARP cam bolts too. You should have 10mm cam bolts but i would double check that.
#2789
And also,this is the cam I'm looking at. http://www.compcams.com/Company/CC/c...?csid=966&sb=0
#2790
I appreciate it folks! This is a learning process for sure,hopefully I won't have to do this again for awhile lol.