ibd2328

iTrader: (2)

As bad as I hate to, ordering some e-fans. Will be wiring them to my CHT sensor for on and off. Whats some good quality ones.

'95flareside

I've heard good things about the flex a lite 270 kit.

jferg92

I hope not. I'm about to say f it and trailer it to a shop. I got sun poisoning at work and couldn't stand being in the garage tonight (still 90 degrees). Keep getting sick everywhere. I need it fixed soon. Rant over

Probably not since he's in Colorado I think

ibd2328

iTrader: (2)

Parts should be at your house tomorrow guys. Let me know when or if you receive them.

my4x4project yours are coming in two seperate bags. One is new trick flow timing cover bolts, the other is directly from me for the EGR block off.

Carcrazygts2

IBD the Flex a lite 270 is well worth the cost. Its controller is extremely accurate. The only issue I have had is the little pressed in stud broke on one motor. Called Flex a lite, and the sent me a new motor, and 2 new fan blades. When i fixed it I knocked out the studs and used bolts and lock nuts.. They wont come loose this time.

ibd2328

iTrader: (2)

Is the controller temperature sensitive? 600 bucks?? The heck with that.

MyFX4Project

Just called my engine builder... he said itll probably be another few weeks until he can get to the heads. Damn...

jferg92

I'd enjoy the time off. The radiator drain broke off in my hand just now

ibd2328

iTrader: (2)

Should be in your drive way this evening. I got a spare radiator as well.

jferg92

Didnt come today but I'll keep an eye out
Any suggestions? Rad Drain nut broke off in my hand. trying to get the core out to replace the whole valve